The C75 Series of DC/DC converters offers a single output to 28Vdc and 500 Vdc of isolation. They are available in either PC or Chassis mount configurations. Their rugged enclosure, low output ripple, and excellent regulation characteristics make them ideally suited for applications such as process control equipment, telecommunications, and transportation. All models will tolerate a short circuit indefinitely.
|Temp. (Stability): 0.02%/Deg C|
Temp. (Operating Case): -40 to +85 Deg C
Temp. (Storage): -40 to +125 Deg C
EMI/RFI: Six Sided Shield
Cooling: Conv. / Forced Air
* All models designed to meet IEC/UL/CSA/EN 62368
* * For RoHS Compliant part, add suffix /Y
|Input Ranges: 10-20Vdc, 18-36Vdc, 20-60Vdc, 36-72Vdc|
Voltage Accuracy: 1%
Line Regulation: 0.1%
Load Regulation: 0.1%
Output Ripple: < 100mV P-P
|Input Filter: PI Network|
Short Circuit Protection: Continuous
Switching Frequency: 130 kHz
Isolation: 500 Vdc
Models Currently In Production
* * For RoHS Compliant part denoted by /Y
APD RoHs Certification
American Power Design, Inc. (APD) certifies that APD's products manufactured with the suffix /Y conform to the requirements of the European Union's Restriction on the use of Hazardous Substances in electrical and electronic equipment (RoHs) Directive, 2015/863. Conformance to the RoHs directive is achieved through the elimination of the use of restricted substances in the manufacture of products and through the enforcement of RoHs restrictions with all of APD's vendors/subcontractors.
The table below identifies the RoHs limit on restricted substances and APD certifies that our RoHs products are below the limit for the substances identified.